2.5ltr Contact Thinner & Cleaner
Pack of 1
Everbuild Contact Adhesive Thinner & Cleaner 2.5 Litre
STICK 2 CONTACT ADHESIVE THINNER AND CLEANER is a solvent based thinner and cleaner for most common contact adhesives.
Areas For Use
- Diluting contact adhesives for priming purposes
- Cleaning/removal of wet and dry contact adhesives
- Degreasing surfaces prior to application of contact adhesives.
CAUTION; SOLVENT BASED PRODUCT; Strictly observe Health and Safety precautions given on this label and avoid contact with skin and eyes. Do not ingest. Avoid inhalation of vapours/fumes. Highly Flammable product - Avoid all sources of ignition. Do not smoke during use.
Avoid contact with sensitive surfaces Always test a small inconspicuous area prior to full coverage.
As the manufacturer cannot know all the uses its products may be put to, it is the users responsibility to determine suitability of use. If in doubt, contact Technical Services Department for advice.
Important: This product is solvent based and should only be used according to the instructions. To prevent solvent abuse, this product should only be sold to adults for its intended use. For self-service retail display, please request empty tins to be used for display and store product separately
As a Thinner; For priming purposes on heavily porous surfaces (eg MDF). Dilute 1 part contact adhesive to 6 parts thinners. Brush on surface and allow to dry. Apply contact adhesive as directed.
As a cleaner; Wear protective gloves and apply to a dirty rag. Rub off unwanted adhesive. Soak tools in this solution as required. Also suitable for degreasing surfaces prior to applying contact adhesive. CAUTION; This product is very aggressive and may damage surrounding surfaces. Always test a small inconspicuous area before use for compatibility.