Bostik Solvent Free Gripfill
Pack of 1
is a solvent free gap - filling adhesive that creates a high strength bond between two materials. Gripfill Solvent Free provides an instant grab, immediately securing materials in place for accurate bonding. Gap filling properties mean uneven surfaces can be bonded without difficulty.
- Buy 6 for £5.17 £4.31 each and save 6%
- Buy 12 for £5.10 £4.25 each and save 7%
Bostik Solvent Free Gripfill 350ml
GRIPFILL Solvent Free is a High Performance, General Purpose, Solvent Free Gap - Filling Adhesive
A solvent free gap - filling adhesive that creates a high strength bond between two materials. Gripfill Solvent Free provides an instant grab, immediately securing materials in place for accurate bonding. Gap filling properties mean uneven surfaces can be bonded without difficulty.
Gripfill Solvent Free has been developed specifically for interior use and is ideal for decorating, refurbishment, building and DIY applications. It may also be used externally in some circumstances provided that the bond remains dry. if in doubt please contact laybond?s Technical Service Department. Easy to use, mistakes can simply be wiped away with a damp cloth. Gripfill Solvent Free dries white and can be sanded and overpainted.
Materials Which Can Be Bonded
At least one surface should be porous.
Wood, plasterboard, MDF, hardboard, ceramics, glass, metal, cork, laminates, uPVC, brick, breeze block, concrete, most plastics etc. Especially suitable for bonding substrates which are sensitive to solvents such as expanded polystyrene, foamed and laminated PVC?s.
Expanded polystyrene mouldings, covings, architraves, skirting boards, picture/dado rails, decorative wall panels, shelves, window frames and sills, carpet grippers, work tops.
Surfaces must be clean, dry and free from loose material. very porous materials should be primed with a suitable PVA priming solution.
Cut off the plastic tube end just above the thread, remove the nozzle fixed to the tube and screw into place. Cut the nozzle at an angle to provide the size of the bead required. Fit into cartridge gun and squeeze trigger. Apply a continuous bead along the length of the item to be fixed, for larger surfaces apply a continuous bead around the edge approximately 1cm from the side. For larger areas apply further beads at approximately 30cm intervals. Press materials firmly together ( Temporary support may be necessary in some instances ) once the bond has been made, leave to dry for 24 hours.
Wash off with soap and water when still wet - do not allow to dry before cleaning.