25kg White Tank SlurryProduct Code: 56015
KA Tanking Slurry
The KA Tanking Slurry waterproofing system provides a solution to water leakage, ingress or seepage in concrete structures or any cementitious substrate. The formation and development of insoluble crystals into water bearing capillaries and fissures effectively blocks the further
The KA system is designed to function against water penetration in various conditions. KA Tanking Slurry is supplied as a powder and when mixed with water, is applied directly to concrete, blockwork masonry or cement renders in areas where general waterproofing is required. KA Tanking Slurry is used in conjunction with KA Super Plug for instant leak plugging.
KA tanking Slurry can be applied to new or old structurally sound surfaces. It can be applied either to the negative or the positive side and will negate dampness in ground water permeation even under hydrostatic pressure.
KA Tanking Slurry can be used for the following applications.
- Retaining Walls and columns in reservoirs
- Swimming Pools prior to tiling or painting
- Concrete drinking water tanks
- Water Treatment and sewerage plants
- Foundation Slabs
- Underground Cellars, basement car parks, garages, etc.
- Pre-stressed and pre-cast concrete units
- Tunnels, silos, irrigation channels
- Bathrooms, kitchens, etc
- Lift Shafts
- Vehicle maintenance pits
How it works
On site KA tanking slurry is mixed with water to form a smooth paste. The paste is applied directly to concrete or masonry structures and penetrates a short distance into capillary cracks, fissures and pores in the surface of the concrete. The presence of water and free lime causes the tanking slurry to form insoluble crystals which block the pores and prevent passage of water. This effectively makes the concrete water tight for the lifetime of the structure.
Where it can be used
KA Tanking Slurry can be applied by brush or spray to new or old structurally sound surfaces, without a bonding coat, either to the internal or the external side. It can be applied to both horizontal and vertical surfaces. Surfaces should be prepared to have a capillary open structure.
The waterproofing barrier should run continuously around the whole structure. The product is for use where the basement is above the level of the water table. KA Tanking Slurry can be used for the three grades of protection of basements described in S58102:
- Grade I for car parking
- Grade 2 for plant rooms, workshops and garages
- Grade 3 for residential and commercial areas
KA Tanking Slurry has passed the tests of VVRAS Water Regulations Advisory Scheme, B56920 and is approved for drinking water structures such as reservoirs and concrete drinking water tanks.It can also be used in swimming pools, retaining walls, tunnels and lift shafts.
A two-layer application requires about 3 kg/m2 of powder, but this depends on the roughness of the surface.
KA Tanking Slurry is supplied in powder form in 25kg plastic tubs
Store in a dry place and protect from frost. The shelf life of KA Tanking Slurry is 12 months when stored in unopened containers.
|Pack Qty||Pack of 1|
|Stock Availability||In Stock|