25ltr Premseal Primer

Premseal Primer 25L

PREMSEAL PRIMER is used in conjunction with Premseal Waterproof membrane in order to consolidate the substrate and ensure complete bond development

Type-Bitumen Solution

Viscosity -500 cP

Solids-Content 48%

Flash Point->39 ºC 

Coverage- 6 –8  m²/l

WFT- 90­110 microns

DFT- 45­60 microns

Specific Gravity-  0.92 

DESCRIPTION AND AREAS OF USE

Premseal Primer is a bitumen based adhesive solvent solution which is specifically formulated to provide excellent adhesion for Premseal Waterproofing Membranes under many kinds of surface conditions. Premseal Primer is an integral part of the Premseal Waterproofing System and sufficient primer must beused on dry surfaces to condition them to be dust free so that the substrate is suitable for the application of Premseal Waterproofing Membranes. 

Used to prime all structural concrete, masonry, or wood surfaces on which waterproofing membranes will be used. Designed to be used on applications down to –4°C. May be used on horizontal surfaces, but remains tacky, and precautions must be used in this application to prevent contamination of the Primer surface prior to installation of the membrane. May be used on all concrete block and brick wall conditions. APPLICATIONNuraflux Primer may be applied with roller, brush or spray. A roller with a heavy nap should be used to carry sufficient material to the area being primed.

Apply all Premseal Primer to a clean, dry, dust free and frost free surface at a coverage of approximately 5 sqm/litre. The primer should be spread sufficiently to avoid areas of excess material. Areas of excess material will lengthen the drying time on the application of the primer.