Exitex Macclex 914mm Silver Mobilty Sill
Pack of 1
Exitex Macclex15/56 Mobility Sill - Silver - 914mm
For inward opening doors, under door clearance 12mm & suitable for moderate exposure.
For inward opening doors, under door clearance 12mm & suitable for moderate exposure.
£19.26
£16.05
Availablity: In stock
SKU
41038
Exitex Macclex15/56 Mobility Sill
Colour : Silver
Size:914mm
Product Information
- For inward opening doors
- Under door clearance 12mm.
- Suitable for moderate exposure.
- Ideal for double doors
- Accepts MWK striker block for flush bolts in double doors
- Designed for 56mm thick doors
Fitting Instructions:
- Remove rubber seals from aluminium sill section. Check width between inside faces of the doorframe rebate and cut aluminium section to this size.
- Cut the rubber seals 10mm longer than the aluminium and reinsert into the grooves in sill.
- Notch both ends of sill and allow it to fit into the doorframe rebate. When the door is in the closed position the front seal should be compressed by approximately 3mm. Notch sill to allow for this.
- This sill requires an under door clearance of 13mm. If necessary, remove door and trim to allow for this, ensuring bottom of door is smooth to avoid damage to rubber seals.
- Position the assembled sill between the doorframe and the mark fixing points through countersunk holes. Remove sill, drill fixing holes and insert plugs.
- Apply sealing compound to underside of sill where sill comes into contact with the doorframe. Screw sill into place.
Manufacturer | EXITEX |
---|---|
Colour | Silver |
Pack Size | 1 |
Colour | Silver |
Write Your Own Review