Bond It Lead Pro
Pack of 1
A fast skinning roofing sealant that reduces weather ingression, tile lift and noise. Tough, resilient and compatible with lead.
Free Express Delivery On Orders over £85
Flash Mate Lead Sealant
A fast skinning roofing sealant that reduces weather ingression, tile lift and noise. Tough, resilient and compatible with lead. Conforms to ISO11600-F-25LM and BS5889-A.
Application: Can be used to bond glass and glazing plastics as well as small sections of roofing materials under repair. Ideally suited for sealing roof lights, conservatories, soffits, glass houses, industrial roofing systems, lead flashings, and to prevent tile lifting and wind noise. Also has excellent UV, heat and ozone resistance and sets to tough resilient rubber.
e for Lead
Product Description
Flash-Mate Lead Sealant is a low modulus neutral cure fast-skinning, roof sealant. It is designed to stop weather ingression, tile lift and noise.
Product Uses
Flash-Mate Lead Sealant is used to seal or bond dissimilar materials to prevent weather ingression.
Flash-Mate Lead Sealant can be used to bond glass and glazing plastics as well as small sections of roofing materials under repair. Ideally suited for sealing rooflights, conservatories, soffits, glass houses, industrial roofing systems, lead flashing and to prevent tile lifting and wind noise.
Flash-Mate Lead Sealant is compatible with lead, galvanised steel and all metals. It has excellent UV, heat and ozone resistance and sets to tough resilient rubber.
Areas of Use
- Glass
- Slate
- All metals including lead and galvanised steel
- Concrete and brick
- GRP
- Sealed timberplastics (including polycarbonate)
- Acrylics
- PVCu
- All painted surfaces
| Pack Size | 1 |
|---|---|
| Colour | Grey |
| Shelf Life | 12 months from date of manufacture |
| Storage | Dry conditions between 1oC and 25oC. |
| Flammability | Non-flammable |
| Solubility in Water | Insoluble |
| Tooling Time | 5-10 minutes |
| Skinning Time | 15-25 minutes |
| Curing Rate | 1-2mm per day |
| Joint Movement Capability | 25% by ISO methods |
| Application Temperature | +5oC to +30oC |
| Service Temperature | -50oC to +120oC |
