Brickfill 100mm
Pack of 1
Is a low resistance joint filler, manufactured from high quality closed cell polyethylene and has been specifically designed and developed for all clay fired brickwork, calcium silicate brickwork and blockwork.
Free Express Delivery On Orders over £85
Brickfill Expansion Joint Roll 100mm x 10mm x 10m
Brickfill Brickfill is the leading brand of expansion jointing material for movement joints, in brick and blockwork. It is a low resistance joint filler, manufactured from high quality closed cell polyethylene and has been specifically designed and developed for all clay fired brickwork, calcium silicate brickwork and blockwork. Brickfill fully meets the British Standards for movement joints in brickwork. The BS states: “The compressibility of the sealant back up/joint filler is possibly the most critical factor in the design of an adequate joint for clay fired brickwork. Flexible cellular polyethylene or foam rubbers are the most satisfactory materials. Hemp, fibreboard and similar materials should NOT be used.” All pre-cut rolls have a scored tear off strip. Simply build in Brickfill flush with the surface of the brickwork and then pull off the “tear off” strip, leaving a correctly sized recess, to allow the installation of a suitable high performance silicon sealant, without the need for a bond breaker. Key Features·
|
| Manufacturer | FILCRETE |
|---|---|
| Colour | White |
| Pack Size | 1 |
| Colour | White |
