Catnic Standard 3.0 Metre Angle Bead
Pack of 50
Designed for two and three coat applications, Standard Angle Bead forms strong and accurate corners resistant to chipping and cracking.
Catnic Galvanised SteelStandard Angle Bead 3.0m
- Plaster Depth: 12-19mm
- Flange Width: 53mm
- Galvanised Steel BSEN 10327-DX51D+Z275
Designed for two and three coat applications, Standard Angle Bead forms strong and accurate corners resistant to chipping and cracking. Available in Galvanised Steel for internal applications and available in Stainless Steel for external use and high condensation and moisture areas.
A Catnic angle bead form strong accurate corners which are resistant to chipping cracking whilst providing strength protection against everyday knocks. A Catnic angle bead will help to protect and reinforce plaster where it is most vulnerable.
The Catnic angle bead range on offer have been designed for both internal use and outer plaster uses, manufactured from quality galvanized steel sheet, expanded or perforated mesh.
The Catnic angle bead has been specifically redesigned to help eliminate the cut outs by replacing them with a straight, smooth edge that will not cause injury to users. The new version of the Catnic angle bead has been well received by both builders & merchants alike & they have supported the drive to help enhance the level of Health & Safety standards in the area.