• Free Express Delivery on orders over £85
  • Click & Collect Available
  • Free returns hassle free

Everbuild 20kg Self Level Flexiplus 710

Pack of 1

Everbuild 710 Self Level Flexiplus 20kg
Excellent Self Leveling Compound For External & Internal Use. Typical surfaces include concrete and screeding, existing ceramic tiles, asphalt, wood, brick, stone etc.
£17.51 £14.59
Availablity: In stock

Free Express Delivery On Orders over £85

Everbuild 710 Self Level Flexiplus 20kg

Product Description

EVERBUILD SELF LEVEL FLEXIPLUS is a latex modified cement based powder, which when mixed with water, can be used to level out uneven floors and screeds. Typical surfaces include concrete and screeding, existing ceramic tiles, asphalt, wood, brick, stone etc. This product is intended for use prior to laying ceramic tiles, thermoplastic tiles, lino, wood block flooring or carpet. SELF LEVEL FLEXIPLUS already contains powdered latex, eliminating the need for separate expensive latex liquids. When mixed as directed, the compound provides a free flowing mix that sets in 90 minutes and can be overlaid after only 8 hours at normal temperatures... NOTE: This product is not suitable for use as a final wearing surface.


  • Enhanced flow properties coupled with long open time giving easy trowelling.

  • Fast setting - sets in 8 hours.

  • Up to 6mm in depth in one coat.

  • Protein (casein) free.

  • Internal/external use.

Areas for Use

For levelling uneven subfloors prior to covering/tiling, without the need to use a separate latex additive


Always mix with clean fresh water and always-prime floors as directed.The product will not resist rising damp. In these conditions, use in conjunction with BLACKJACK D.P.M liquid dampproof membrane as directed.Never exceed the quantity of water stated. This will dramatically reduce strength and cause cracking.Do not mix more compound than can be laid in 20 minutes and never try to reconstitute once the product has set.On substrates where underfloor heating is in place, switch of the heating for 24 hours before and after application.Do not use this product below 4oC.As the manufacturer cannot know all the uses its products may be put to, it is the users responsibility to determine suitability for use. If in doubt, contact Technical Services Department.Note that setting time will be greatly increased when overlaying impervious surfaces and in cold weather.

More Information
Manufacturer Everbuild
Colour Grey
Pack Size 1
Colour Grey
Write Your Own Review
You're reviewing:Everbuild 20kg Self Level Flexiplus 710
Your Rating

Need Help? Ask a question or call 01254 52525