Everbuild 5 Litre 204 Evermix 3 in 1 Waterproofer
Pack of 1
Is a triple action air entraining chloride free liquid/gel admixture for waterproofing, plasticizing and retarding the setting time of render mixes, such as roughcast, harling and dashing.
Everbuild 204 Evermix 3 In 1 5 Litre
Product Description
EVERMIX 3 IN 1 is a triple action air entraining chloride free liquid/gel admixture for waterproofing, plasticizing and retarding the setting time of render mixes, such as roughcast, harling and dashing. The product also acts as a salt inhibitor. May also be used internally after installation of a DPC system. Tested to BS4887 1973 ( air entraining properties)
Benefits
- The combination of an air entrainer and retarder allows larger areas to be covered in one application
- Improves workability/trowelability..
- Significantly reduces water penetration.
- Chloride free (chloride ion content < 0.1%).
- Reduces bleeding/segregation.
- Improves durability
- Inhibits efflorescence.
- Reduces shrinkage (cracking and crazing reduced).
- Enhances insulation properties.
Areas For Use
As an admixture for exterior/interior cementicious render finishes such as roughcast, harling and dashing. May also be used internally after installation of a DPC system.
Limitations
- When mixing, take care not to over mix.
- Does not replace a DPC
Surface Preparation
Before using 3 IN 1 IN RENDER MIX, it is important to ensure that the surface to which it is to be applied is clean and free form dust and loose material and that the structure has sufficient mechanical strength. Walls should be wire-brushed and any old paint etc. removed. All contaminants such as oil, grease, or any surface contamination must be removed to ensure adequate development of bond when the render is applied.
Manufacturer | Everbuild |
---|---|
Colour | Black |
Pack Size | 1 |