Everbuild 5 Litre 206 Strike Release Oil
Pack of 1
Everbuild 206 Strike Release Oil 5 Litres
Is high quality sprayable chemical release agent for use on all types of standard formwork materials. Carefully formulated from selected highly refined mineral oils, it is recommended for spray application to moulds manufactured from wood, metal, polypropylene, ABS, polyurethane and other plastics which are susceptible to long term damage by conventional release agents.
Is high quality sprayable chemical release agent for use on all types of standard formwork materials. Carefully formulated from selected highly refined mineral oils, it is recommended for spray application to moulds manufactured from wood, metal, polypropylene, ABS, polyurethane and other plastics which are susceptible to long term damage by conventional release agents.
£19.24
£16.03
Availablity: In stock
SKU
53226
Everbuild 206 Strike Release Oil 5 Litres
Product Description
EVERBUILD STRIKE RELEASE OIL is high quality sprayable chemical release agent for use on all types of standard formwork materials. Carefully formulated from selected highly refined mineral oils, it is recommended for spray application to moulds manufactured from wood, metal, polypropylene, ABS, polyurethane and other plastics which are susceptible to long term damage by conventional release agents. Produces a high quality stain and blemish free concrete finish with minimum incidence of blowholes.
Benefits
- Greatly reduced swelling effect on thermoplastics and rubber when compared with conventional release agents.
- Chemical reaction provides clean, positive release even with more porous form materials (eg wood) and a matt stain free concrete surface with minimal incidence of blowholes and formwork damage.
- Concrete struck with STRIKE RELEASE OIL requires simply brushing down prior to application of subsequent surface coatings, cementicious renders or repair materials.
- STRIKE RELEASE OIL gives a water repellent coating, protecting formwork from rain showers and providing a degree of rust inhibition to steel formwork. Conforms with all the requirements specified in “Formwork - A Guide to Good Practice” book section 3.10.2.
- Suitable for use with portable water structures - Water By Laws Scheme - Approved product.
Areas For Use
- As a sprayable/brushable release agent for wood, metal and plastic moulds.
Limitations
- Keep away from sources of ignition.
- Only apply a thin film. Overdosing can cause dusting.
Surface Preparation
All formwork should be clean and dry before application.
Manufacturer | Everbuild |
---|---|
Colour | Black |
Pack Size | 1 |
Write Your Own Review