Everbuild Everflex Brown 200 LMA Silicone
Pack of 1
Contract grade acetoxy cure silicone sealant. For general glazing, weatherproofing, sanitary and gap sealing applications. Quick curing, mould resistant.
- Buy 6 for £2.88 £2.40 each and save 2%
- Buy 12 for £2.64 £2.20 each and save 10%
Everbuild 200 Contractors LMA Silicone Brown 295ml
SILICONE 200 CONTRACTORS is a cost effective Acetoxy cure sealant that adheres to most smooth and non-porous materials. This product contains an anti-fungal compound to prevent mould growth in areas of high humidity. SILICONE 200 is mid to low modulus in nature.
- Permanently flexible.
- Anti-fungal formula - prevents mold growth.
- Quick curing - low dirt pick up.
- Low viscosity for fast application
Areas For Use
- Sealing glass to glass.
- Sealing glass to aluminium and metal sealing.
- Sealing around baths, showers, basins and other sanitary ware.
- As an adhesive for fixing PVCu trims, cladding and panels.
- Sealing around worktops and laminates.
- Cap glazing to metal, timber and PVCu window frames, and pointing around window and door frames.
- For aluminium gutter sealing.
- General draughtproofing.
- Not for use in aquarium manufacture. Use EVERFLEX AQUAMATE
- Not for use in conjunction with bitumen, or asphalt. Use ALL SEASONS SEALANT.
- Not for use on highly porous surfaces such as new concrete or stonework. Priming is advised or use SILICONE 450.
- Not for use on substrates that may bleed oils, solvent or plasticisers.
- Do not use in the vicinity of, or in conjunction with the edge sealant of double glazed units. Use SILICONE 450.
- When applying to uPVC, priming is recommended. Always carry out an adhesion test before using on uPVC.
- Do not use on soft metals such as lead and brass. Use LEADMATE SILICONE.
- Non overpaintable. In applications where overpainting is required, use ALL SEASONS SEALANT
|Movement Accomodation||+ or -20%|
|Skinning Time||5 mins @ 20°C|
|Cure Time||2mm per 24 hours|
|Hardness (Shore A)||15-25|
|Service Temperature Resistance||-30°C to + 150°C|
|Tensile Strength||1.5 MPa|
|Stress||0.3MPa at 100% elongation|
|Minimum Joint Width||4mm|
|Maximum Joint Width||25mm|
|Cleaning||Uncured sealant: white spirit; cured sealant: EVERFLEX SILICONE EATER|
|Joint Ratio||Maximum depth 50% of joint width|
|Coverage||@ 10 linear metres, 9 x 9mm fillet joint|
|Elongation At Break||400%|
|Storage||Store in cool dry conditions between + 5’C and 25’C.|
|Shelf Life||24 months from date of manufacture|