Exitex Gold Door Surround

Gold Exitex Door Surround

• For inward and outward opening doors and windows


• An aluminium carrier with a tough flexible weather energised TPE gasket - allows for 3 mm of door movement at all temperatures.


• Ready mitred corners for perfect finish.


• Stainless steel screw slot fixing for adjustment or pin fixing optional.

•  The door should be in the closed position.


• Remove rubber seals from aluminium sections.


• Measure and cut the short piece of aluminium to fit across the top of the door frame. Use a fine tooth hacksaw, cut at an angle to give a 45 degree mitre.


• Cut rubber seal to length and insert into aluminium.


• Nail or screw into position.


• Measure from fitted top strip to door bottom, and cut the side pieces to the length required. Use a fine tooth hacksaw, cut at an angle to give a 45 degree mitre. Important leave sealing blade 12mm (1/2") longer. Using a pair of pliers nip the bottom of the gasket retaining channel to keep the seal in place after insertion.


• Place the side sections against the door and nail or screw into position.


• IMPORTANT If screw fixing is provided, "Posi" slotted type screws are supplied for safe and easy installation, use a No.1 screwdriver. On hardwood frames first make a pilot hole with a bradawl or small drill, in the centre of the slots.