Sikamus Cream 300ml

SikaMur InjectoCream-100

Product Description

SIKAMUR® INJECTOCREAM-100 is a new concept for the control of rising damp. SIKAMUR® INJECTOCREAM-100 is a water repellent, silane-based emulsion. A simple application gun is used to inject the cream into a series of holes drilled into a mortar course. Once injected to the mortar course, SIKAMUR® INJECTOCREAM-100 will diffuse within the damp wall to form a water repellent barrier (damp-proof course, DPC) and block future rising damp.

Benefits

• Fast and easy to install, one-component ready to use


• No need for preliminary watertight sealing around the injection holes


• Quick and consistent application – easy to calculate the amount of material required


• Does not require a special, expensive pump Spillage and mess virtually eliminated from the site – no problem with fluids flooding through party walls, cavities or service ducts


• Concentrated formula with approx. 80% active ingredients


• Low hazard, water-based product – non-caustic, non-flammable and not injected under pressure


• Very low wastage


• No risk of increased efflorescence (as with siliconate-based rising damp treatments)

Areas For Use

Suitable to treat rising damp in almost all types of masonry walls:

• Solid brick walls


• Cavity walls


• Random form stone and rubble infill walls, etc

Limitations

• Injection should be carried out when the ambient temperature will not drop below 0°C for at least 48 hours after application, to allow optimal diffusion of the material


• In all cases the new damp proof course shall be installed in accordance with the relevant code of practice e.g. British Standard for Installation of Chemical Damp Proof Course, BS 6576 (2005)


• SIKAMUR® INJECTOCREAM-100 should not be used for surface impregnation applications