Exitex Silver 914mm Macclex Sill

Exitex Macclex Sill 

Colour : Silver 

Size : 914mm

• For inward opening doors


• Underdoor Clearance 25mm


• Suitable for exposed locations


• Ideal for double doors.


• Accepts Exitex ‘patented’ Striker Block

• Remove rubber seal from Aluminium sill section. Check width between outside faces of the doorframe rebate and cut aluminium section to this size.
  
  
  
  
  
  
  
  
  
  
  
  
  


• Cut the rubber seal longer than aluminium section to allow seal to extend into the kwikfit lugs and re-insert into the groove in sill. Attach kwikfit lugs to each end of the sill.


• This sill requires an underdoor clearance of 25mm. If necessary, remove door and trim to allow for this, ensuring bottom of door is smooth to avoid damage to rubber seal.
  
  
  
  
  
  
  
  
  
  
  
  
  


• Position the assembled sill between the doorframe and mark fixing points through countersunk holes. Remove sill, drill fixing holes and insert plugs.


• Apply sealing compound to underside groove at back of the sill around kwikfit lugs. Ensure rubber seal at front is in place and screw sill into place.